Synthetic film wax is a creamy clear wax that is very easy to apply and soft on the skin. This wax is ideal for facial hair removal and other areas where the skin is more sensitive. This wax does not leave red spots and is suitable for people with hypersensitivity to pine wax and other allergies.
To start with waxing, there are several supplies and wax systems suitable for waxing / waxing the forearm.
1. Make sure your skin is oil-free: The skin must be clean, dry and, if necessary, oil-free before you start. If this is not the case, the wax or wax cannot adhere well to the hairs. We recommend using a pre-wax gel and talcum powder.
2. Make sure the wax is at the right temperature: For best results it is important that the wax is applied at the right temperature. The wax should be 45 degrees after heating and look like liquid honey. This will take about 20 minutes.
3. Apply the wax: When the wax is at the right temperature, you can apply it. You do this with a wax spatula. Always make sure you end on a piece of skin without hair. This will make removing the wax easier.
4. Removing the wax: After applying you will now have to remove the wax. First check if the wax is hard and remove it by grasping the end and pulling it loose in 1 go. For best results, it is important that you stretch the skin while removing the wax.
After waxing, you can rub the skin well with a nourishing cream, lotion or oil. This will reduce the skin's reaction and reduce the risk of ingrown hairs.
With the above explanation you are well prepared to wax your forearm yourself with synthetic film wax!